▒▒ EM4SYS ▒▒
  Untitled Document
 
Untitled Document
 
Home > 제품소개 > 레이저 광 센서 / 계측분야

Setup Configuration

⊙ 직접투사 방식 (Total Beam Projection Type)
Keep the distance d=1~3cm for the LED
No restriction in d for the LD.
Locate the beam spot as close as possible to the centerline.
 
The full scale(FS) can be varied. If FS is reduced, the mechanical resolution is accordingly improved(refer to the instruction manual provided in detail).
 

 

 
⊙ 전반사 방식 (Total Reflection Type)
Keep the rotation and displacement other than the travelled motion as small as possible.
 
The various nominal distance(d) and full scale(FS) can be obtained by rotating the LD socket included.
 
D and FS are set to minimum values when firstly provided.
 
Determine the mirror size depending on your nominal distance.
 

 

 
⊙ 난반사 방식 (Diffused Reflection Type)
Keep the surface normal to the incident light beam during the movement if possible.
 
The standard sensing gain provided is measured in a white-sprayed surface
 
The calibrated data sheet for the specific surface condition can be provided if requested.
 

 

Overview   Description   Application   Setup Configuration
General Performances   Components        

Untitled Document